Creating a Single Phased Sound with TL EveryPhase

A single phased sound (one cycle of the phaser) can be created using automation of the LFO manual trigger.

To create a single phased sound:

1 Insert TL EveryPhase on a track.

2 Select an appropriate LFO Waveform, such as Ramp.

3 Set the Rate to an appropriate value.

4 Enable the LFO Single trigger so the LFO will only cycle once.

5 Select the Auto button at the top of the TL EveryPhase plug-in window.

6 Add LFO Manual Trigger to the automation list.

7 Set the Automation mode for the track to Write or Touch.

8 Play the session

9 At the point where you wish phasing to start, click on Manual Trigger to start the LFO. The automation for this action will be recorded onto the track.

The Bypass and/or Depth controls can also be automated to ensure TL EveryPhase does not effect any part of the sound except the specific section required.

Creating a Gradual Phaser Effect

As an alternative to bypassing TL EveryPhase when an effect isn’t needed, the Depth control can be automated to introduce and fade out TL EveryPhase on a track as required.

Adding Other Effects

For different phaser sounds, try using a compressor before or after TL EveryPhase. Other useful effect plug-ins to try with TL EveryPhase include distortion, delay, and EQ.